VENTUM Fine Speed Control – Redefining Comfort, Maximizing Savings
Traditional ceiling fans usually come with only five fixed speed settings, limiting users to predefined airflow levels. As a result, they often have to compromise—either enduring less-than-ideal comfort or consuming more energy than necessary.
Ventum transforms the traditional ceiling fan experience with its innovative Fine Speed Control, enabling precise adjustments in increments as small as 5 RPM. With a wide speed range of 140 to 385 RPM, users can fine-tune airflow to their exact comfort level—delivering maximum cooling efficiency while eliminating unnecessary power consumption.
Why VENTUM Fans Deliver Greater Energy Savings
When choosing a BLDC ceiling fan, most buyers focus only on the advertised input power—usually between 28W and 35W for a 1200mm model. But real energy efficiency goes beyond wattage. Key factors such as airflow efficiency, power factor, total harmonic distortion (THD), and even idle power consumption all determine how much electricity a fan truly saves in day-to-day use.
Compared to other BLDC fans such as Atomberg Renesa, Crompton Energion, and Havells Efficiencia, Ventum consistently delivers superior performance across key efficiency parameters—all while maintaining complete transparency in its specifications.
Are BLDC Fans Built to Last?
With India’s increasing emphasis on energy-efficient appliances driven by new policies and standards, BLDC (Brushless DC) fans have emerged as a modern and sustainable alternative to traditional AC Induction Motor (ACIM) fans. Introduced to the Indian market in 2012, BLDC technology is already well-proven, delivering substantial electricity savings compared to conventional fans. However, adoption has been gradual—largely due to higher upfront costs and certain market dynamics. At the same time, many consumers remain cautious, questioning the reliability of this relatively newer technology despite its proven track record.
How Much Power Does a Ceiling Fan Use at Maximum Speed?
Ceiling fans are among the most widely used household appliances, yet a common question persists—does operating them at lower speeds actually save electricity? The answer isn’t straightforward; it largely depends on the fan’s design and the mechanism used for speed regulation. A key priority was to reduce energy loss across all speed levels while providing precise, stable control. Tackling this challenge became a central part of Ventumfan’s design journey.
Are BLDC Ceiling Fans a Smart Buy?
When shopping for ceiling fans, one of the most common questions consumers ask is whether the higher upfront cost of BLDC fans is justified. Known for their superior energy efficiency and advanced features, BLDC fans are often positioned as a long-term investment rather than a simple household purchase. But does the value they offer truly match their price?
The Working Principle of a Ceiling Fan
For over a hundred years, ceiling fans have remained one of the most trusted appliances for thermal comfort in both homes and commercial spaces. Their working principle is simple, yet highly effective—making them one of the most energy-efficient ways to stay cool. Instead of reducing room temperature, ceiling fans create air movement that helps occupants feel cooler and more comfortable. Let’s explore the science and mechanics behind how this timeless appliance works.
Ceiling Fan Motors Explained
For over a century, ceiling fans have served as one of the simplest yet most effective active cooling solutions for homes and commercial spaces. They offer an energy-efficient way to maintain comfort by using a motor to rotate blades that circulate air downward from the ceiling. The overall efficiency of a ceiling fan is determined primarily by two factors—the motor and the blade design. Among these, the type of motor plays a crucial role in defining the fan’s efficiency, performance, and reliability.
Convenient Fan Controls for Everyday Comfort
Ceiling fan technology stayed nearly the same for more than a hundred years. But with the arrival of super energy-efficient fans, the industry began to see major innovations. One of the biggest transformations has been in the way fans are operated. Instead of relying solely on the age-old wall switch and regulator, today’s ceiling fans come equipped with a range of modern, convenient, and user-friendly control options.
Common Reasons Your Ceiling Fan Makes Noise
High-Speed and High-Airflow Ceiling Fans
A ceiling fan is a straightforward electrical appliance powered by a motor that spins its blades to circulate air and create a cooling effect. The airflow generated by a ceiling fan is measured in Cubic Meters per Minute (CMM), which represents both the volume of air moved and the speed at which it is delivered. By adjusting these two factors, fan designers can fine-tune performance—making certain models better suited for gentle comfort, while others deliver powerful airflow for larger spaces—all while maintaining the same overall airflow rating.
Do BLDC Fans Really Consume Under 28W?
Many BLDC ceiling fans are promoted primarily on the basis of their power consumption. However, actual consumption is influenced by several factors such as fan size, airflow output, and operating speed. A figure that often comes up in marketing is “28W”, raising the question—can a BLDC fan really run on 28 watts or less?
The truth is, there are two possibilities. First, it could be a marketing tactic, where specifications are presented in a way that sounds impressive but doesn’t tell the full story. Second, the fan may indeed consume that little power—but only under specific test conditions, not in typical real-world usage.
VENTUMFAN: The Right Fan for the Right Flow
Is Your Ceiling Fan Truly Fair to You and the Environment?
Ventumfan designs ceiling fans with a clear purpose—to be fair to consumers, the nation, and the planet.
Customers: Smarter Innovation for Everyday Comfort
Traditional ceiling fans consumed high amounts of electricity, leading to inflated power bills and contributing to pollution from power generation. Ventumfan challenged this norm by introducing India’s most advanced energy-efficient ceiling fans.
By replacing the outdated AC induction motor with modern Brushless DC (BLDC) technology, Ventumfan delivers the same cooling comfort at a fraction of the power consumption. This means lower electricity bills for households, reduced energy demand for the country, and a smaller carbon footprint for the environment.
Ventumfan isn’t just another ceiling fan—it’s a responsible innovation that brings fairness to everyone it touches: the user, the community, and nature.
Ventumfan: Where Green Innovation Meets Everyday Comfort
Eco-Friendliness Beyond Just Power Savings
Many BLDC ceiling fans are promoted as “eco-friendly” because they help save around 1 kg of CO₂ emissions and nearly 2 liters of water per day by reducing electricity consumption. While this is a positive step, true eco-friendliness goes beyond just cutting power use.
Unfortunately, many brands that advertise sustainability continue to rely heavily on plastic packaging, avoid using RoHS-compliant electronic components, and still follow processes that negatively affect the environment. In such cases, the eco-friendly claim becomes more of a marketing label than a genuine commitment—especially when the shift to BLDC technology was driven primarily by government mandates rather than environmental responsibility.
At Ventumfan, eco-consciousness is not an afterthought. It is integrated into every stage—from design to materials to packaging—ensuring that sustainability is a practice, not just a promotional slogan.
Ventumfan: Redefining Fair and Sustainable Cooling
The Importance of Choosing the Correct Ceiling Fan Size
A ceiling fan stands out as one of the most energy-efficient and cost-effective ways to stay cool, especially when compared to air conditioners or air coolers. The reason lies in how each solution provides cooling. As Ventumfan simply explains—an air conditioner cools the room, while a fan cools the people in it. Since a fan directly cools the occupants rather than the entire space, choosing the right coverage area becomes a key factor in ensuring comfort.
What Should You Do If the Ventumfan Remote Is Lost?
Sometimes, we run into the problem of not finding the remote. It could be misplaced, thrown out accidentally by kids, or simply not working because the battery has drained. These are everyday situations. But what do you do when the remote isn’t available and you still need to control your ceiling fan’s speed? At least a temporary solution is needed until the remote is replaced.us leo.